Nos | Document type | Certificate No. |
Date issued |
Certificate Expiry |
Designation |
Type designation of engine and its versions |
Certifying Body |
1 | Type Certificate (TC) | 23-D | 30.12.1992 |
Unlimited |
Unlimited It is certified that a type design of D-18T engine conforms to the requirements of the engine certification basis.Basic operational restrictions and features of a type are included into the Data sheet which is an integral part ofthis Certificate |
D-18Т |
IAC AR |
2 | Supplement to TC | 23-D/01 | 20.12.1994 |
unlimited |
It is certified that a type design of D-18T and D-18T series 3 engines conforms to the requirements of
the engine certification basis. Basic modification, extension of service life (D-18T model) and improvement of reliability with extension of service life (D-18T series 3 model) |
D-18Т, D-18Т |
IAC AR |
3 | Supplement to TC | 23-D/02 | 23.02.1996 |
unlimited |
It is certified that a type design of D-18T and D-18T series 3 engines with basic modification, some
key parts reinforced according to strength conditions introduced in the design, and extension of service life to parts and engines in whole, conforms to the requirements of the engine certification basis |
D-18Т, D-18Т |
IAC AR |
4 | Supplement to Data Sheet | Supplement No. 2 to Data sheet No. 23-D edition 04 | 11.07.1997 | t describes a type design of D-18T engine with basic modification, some key parts reinforced according
to strength conditions introduced in the design, and extension of service life to parts and D-18T engine in whole, and also with entering the values of rotor rotational speeds certified earlier as maximum accepted |
D-18Т, D-18Т |
IAC AR |
|
5 | Supplement to TC | 23-D/03 | 23.02.1998 |
unlimited |
It is certified that a type design of D-18T series 3 engine with basic modification, change over to a
third strategy of service life control, some D-18T key parts introduced in the design and extension of service life to key parts, conforms to the requirements of the engine certification basis |
D-18Т, D-18Т |
IAC AR |
6 | Supplement to Data Sheet | Supplement No. 3 to Data sheet No. 23-D edition 06 | 20.05.1999 | Editorial amendments introduced |
D-18Т, D-18Т |
IAC AR |
|
7 | Supplement to Data Sheet | Supplement No. 3 to Data sheet No. 23-D edition 07 | 15.06.2000 | Secondary modification: including a Mobil Turbo 319A-2 oil into the List of fuel grades and oil
specifications accepted for use |
D-18Т, D-18Т |
IAC AR |
|
8 | Supplement to Data Sheet | Supplement No. 3 to Data sheet No. 23-D edition 08 | 06.10.2003 | Specifies a description of D-18T engine (D-18T and D-18T series 3 models) in terms of No. of Manual on
mid-life repair and a description of specifications related to overhaul and mid-life repair |
D-18Т, D-18Т |
IAC AR |
|
9 | Type Certificate on emissions | SТE 01-АМD | 22.10.2002 |
Unlimited |
It is certified that a type design of D-18T engine conforms to the requirements of the ICAO standards,
Annex.16, Volume 2 “Aircraft Engine Emissions”, edition 2, July 1993 |
D-18Т, D-18Т |
IAC AR |
10 | Data sheet of Type Certificate on emissions | SТE 01-АМD edition 02 | 02.10.2003 |
Unlimited |
Specifies a description of a type design, and also includes information about the certification basis,
levels of exhaust gas emissions specific and standard for an engine type and a method applied for excluding an intentional fuel emission |
D-18Т, D-18Т |
IAC AR |
11 | Type Certificate | ТD 0016 | 08.05.2001 |
Unlimited |
It is certified that a type design of D-18T, D-18T series 3 engines with restrictions and conditions
specified in the data List of the Type Certificate conforms to the airworthiness standards effective in Ukraine as defined according to the national certification procedures |
D-18Т,D-18Т |
SAA |
Zaporozhye Machine-Building Design Bureau Progress State Enterprise named after Academician A.G.Ivchenko